Maxim-integrated 78M6613 PSU Firmware Bedienungsanleitung PDF herunterladen (Seite 16)

78M6613 PSU Firmware Quick Start Guide UG_6612_113

16 Rev.0

5. To program the device’s flash using the flash image that was just programmed in the TFP2’s

EEPROM in steps 3 and 4 above, type the “P” command at the > prompt or simply push the Program

button on the TFP2. If the programming is successful, a “PASS” message will be displayed. The

Firmware programming is now complete.

1 2 ... 11 12 13 14 15 16 17 18 19

Keine Kommentare

Maxim-integrated 78M6613 PSU Firmware Bedienungsanleitung Seite 16