Maxim-integrated High-Speed Microcontroller Users Guide: DS80C390 S Bedienungsanleitung Seite 106
- Seite / 158
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
High-Speed Microcontroller User’s Guide: DS80C390 Supplement
106 of 158
ADDENDUM TO SECTION 11: PROGRAMMABLE TIMERS
The timers of the DS80C390 are very similar to the those of described in the High-Speed Microcontroller
User’s Guide. The primary changes concern the removal of the PMM2 option and the inclusion of the
frequency multiplier settings. The following figures replace the corresponding figures in Section 11 of the
High-Speed Microcontroller User’s Guide. The affect on the timers is summarized in tabular form in
Section 5, Table 5-2, Effect of Clock Modes on Timer Operation.
OSC
0
1
T0M = CKCON.3
(T1M = CKCON.4)
T0 = P3.4
(T1 = P3.5)
C/T = TMOD.2
(C/T = TMOD.6)
0
1
07
GATE = TMOD.3
(GATE = TMOD.7)
/INT0 = P3.2
(/INT1 = P3.3)
TR0 = TCON.4
(TR1 = TCON.6)
70
00
01
M1,M0 = TMOD.1, TMOD.0
(M1,M0 = TMOD.5, TMOD.4)
INTERRUPT
TL0
(TL1)
TH0
(TH1)
TF0 = TCON.5
(TF1 = TCON.7)
TIMER 1 FUNCTIONS
SHOWN IN PARENTHESIS ()
TIMER/COUNTER 0 AND 1
MODES 0 AND 1
MODE 0
MODE 1
4
/CLK
4X/
2X CD1:0 CLK OUT
1 00 /1
0 00 /2
x 10 /4
x 11 /1024
CD1:0 CLK OUT
11 /3,072
anything else /12
- DS80C390 Supplement 1
- 5 of 158 5
- MEMORY MAP 6
- REGISTER MAP 6
- BIT ADDRESSABLE LOCATIONS 6
- WORKING REGISTERS 6
- 7 of 158 7
- 8 of 158 8
- SPECIAL FUNCTION REGISTERS 9
- LSHIFT 10
- PORT 4 (P4) 14
- STACK POINTER (SP) 15
- DATA POINTER LOW 0 (DPL) 15
- DATA POINTER HIGH 0 (DPH) 15
- DATA POINTER LOW 1 (DPL1) 15
- DATA POINTER HIGH 1 (DPH1) 16
- DATA POINTER SELECT (DPS) 16
- POWER CONTROL (PCON) 17
- TIMER/COUNTER CONTROL (TCON) 18
- TIMER MODE CONTROL (TMOD) 19
- TIMER 0 LSB (TL0) 20
- TIMER 1 LSB (TL1) 20
- TIMER 0 MSB (TH0) 20
- TIMER 1 MSB (TH1) 20
- CLOCK CONTROL (CKCON) 21
- PORT 1 (P1) 22
- CE1 CE0 25
- CE2 CE1 CE0 25
- CE3 CE2 CE1 CE0 25
- SERIAL DATA BUFFER 0 (SBUF0) 29
- REVISION ID REGISTER (RID) 29
- ADDRESS PAGE REGISTER (AP) 30
- PORT 2 (P2) 34
- PORT 5 (P5) 34
- CAN 0 CONTROL REGISTER (C0C) 36
- CAN 0 STATUS REGISTER (C0S) 39
- INTERRUPT ENABLE (IE) 44
- 7 6 5 4 3 2 1 0 46
- PORT 3 (P3) 50
- INTERRUPT PRIORITY (IP) 52
- SERIAL PORT CONTROL (SCON1) 55
- SERIAL DATA BUFFER 1 (SBUF1) 56
- STATUS REGISTER (STATUS) 58
- TIMED ACCESS REGISTER (TA) 60
- TIMER 2 CONTROL (T2CON) 61
- TIMER 2 MODE (T2MOD) 62
- TIMER 2 CAPTURE LSB (RCAP2L) 63
- TIMER 2 CAPTURE MSB (RCAP2H) 63
- TIMER 2 LSB (TL2) 63
- TIMER 2 MSB (TH2) 64
- CLOCK OUTPUT REGISTER (COR) 64
- PROGRAM STATUS WORD (PSW) 65
- MULTIPLIER A REGISTER (MA) 68
- MULTIPLIER B REGISTER (B) 68
- MULTIPLIER C REGISTER (C) 69
- WATCHDOG CONTROL (WDCON) 71
- ACCUMULATOR (A or ACC) 74
- CAN 1 CONTROL REGISTER (C1C) 74
- CAN 1 STATUS REGISTER (C1S) 77
- B REGISTER (B) 87
- SYSTEM CLOCK SELECTION 91
- EXTERNAL MEMORY INTERFACING 93
- CE0 CE1 CE2 CE3 94
- START390.A51 file 95
- POWER MANAGEMENT MODES 100
- RESET SOURCES 101
- POWER-ON/FAIL RESET 101
- WATCHDOG TIMER RESET 101
- Reset Output Low (RSTOL) 102
- IN-SYSTEM DISABLE MODE 103
- PORTS 4 AND 5 104
- OUTPUT FUNCTIONS 105
- TIMER/COUNTER 0 AND 1 106
- MODES 0 AND 1 106
- TIMER/COUNTER 2 108
- CLOCK-OUT MODE 108
- (/RL2 = 0) 108
- BAUD RATE GENERATOR MODE 108
- AUTO RELOAD MODE (/RL2 = 0) 109
- DIVIDE-BY-13 OPTION 110
- PROGRAMMABLE CLOCK OUTPUT 110
- DS80C390 111
- 22-BIT PAGED ADDRESSING MODE 114
- MOVX @DPTR, A) 115
- JMP @A+DPTR or the MOVC A 115
- CMA=1, xxxx=4010 121
- MOVX Data 122
- CMA=1, xxxx=4011 123
- MEME MDME 132
- FRAME TYPES 134
- ACK Delimiter 136
- End of Frame 136
- CRC Field ACK Field 136
- CAN INTERRUPTS 139
- INTERRUPT 140
- VECTOR 140
- MESSAGE CENTER 15 141
- Transmitting Data Messages 142
- Receiving Data Messages 142
- Case 1: Automatic Reply 145
- USING THE AUTOBAUD FEATURE 149
- SYNC_SEG 152
- 153 of 158 153
- QUTSEG t)LEN_TS(t 154
- QUSJW t)SJW(t 154
- Threefold Bit Sampling: 155
- Bus Rate Timing Example: 155
- (DS80C390 Supplement Only) 156
- 157 of 158 157
- 40-BIT ACCUMULATOR 158
Verwandte Produkte und Handbücher für Hardware Maxim-integrated High-Speed Microcontroller Users Guide: DS80C390 S
Hardware Maxim-integrated High-Speed Microcontroller Users Guide: Network Mi Bedienungsanleitung
(221 Seiten)
(221 Seiten)
Hardware Maxim-integrated Analog Essentials Getting Started Guide for LX9 an Bedienungsanleitung
(23 Seiten)
(23 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.022 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern