Maxim-integrated High-Speed Microcontroller Bedienungsanleitung Seite 54
- Seite / 176
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
High-Speed Microcontroller User’s Guide
Rev: 062210 54 of 176
4.2.50 Extended Interrupt Priority (EIP)
7 6 5 4 3 2 1 0
SFR F8h — —
PRTCI
PWDI PX5
PX4
PX3 PX2
RW-0 RW-0 RW-0
RW-0
RW-0 RW-0
R = Unrestricted Read, W = Unrestricted Write, -n = Value after Reset
Bits 7, 6 Reserved. These bits will be 0 when read.
PRTCI
Bit 5
Real-Time Clock Interrupt Priority. This bit controls the priority of the real–time
clock interrupt on the DS87C530. This bit will read 0 on all other devices.
0 = The real-time clock interrupt is a low priority interrupt.
1 = The real-time clock interrupt is a high priority interrupt.
PWDI
Bit 4
Interrupt Priority. This bit controls the priority of the watchdog interrupt.
0 = The watchdog interrupt is a low priority interrupt.
1 = The watchdog interrupt is a high priority interrupt.
PX5
Bit 3
External Interrupt 5 Priority. This bit controls the priority of external interrupt 5.
0 = External interrupt 5 is a low priority interrupt.
1 = External interrupt 5 is a high priority interrupt.
PX4
Bit 2
External Interrupt 4 Priority. This bit controls the priority of external interrupt 4.
0 = External interrupt 4 is a low priority interrupt.
1 = External interrupt 4 is a high priority interrupt.
PX3
Bit 1
External Interrupt 3 Priority. This bit controls the priority of external interrupt 3.
0 = External interrupt 3 is a low priority interrupt.
1 = External interrupt 3 is a high priority interrupt.
PX2
Bit 0
External Interrupt 2 Priority. This bit controls the priority of external interrupt 2.
0 = External interrupt 2 is a low priority interrupt.
1 = External interrupt 2 is a high priority interrupt.
- TABLE OF CONTENTS 2
- LIST OF FIGURES 7
- LIST OF TABLES 8
- 1. INTRODUCTION 9
- 2. ORDERING INFORMATION 10
- 3. ARCHITECTURE 11
- 3.1 ALU 11
- Rev: 062210 12 of 176 12
- 3.2.16 Interrupts 13
- 3.2.17 Timing Control 13
- 3.2.18 Real-Time Clock 13
- 3.2.19 Feature Summary 13
- 4. PROGRAMMING MODEL 14
- 4.1 Memory Organization 14
- Rev: 062210 15 of 176 15
- Figure 4-2. Register Map 16
- Rev: 062210 17 of 176 17
- Rev: 062210 18 of 176 18
- Rev: 062210 19 of 176 19
- Rev: 062210 20 of 176 20
- Rev: 062210 21 of 176 21
- Rev: 062210 22 of 176 22
- Rev: 062210 23 of 176 23
- Rev: 062210 24 of 176 24
- 4.2.1 Port 0 (P0) 25
- 4.2.2 Stack Pointer (SP) 25
- Rev: 062210 26 of 176 26
- 4.2.8 Power Control (PCON) 27
- INT1 pin 28
- INT0 is level triggered 28
- Rev: 062210 29 of 176 29
- 4.2.11 Timer 0 LSB (TL0) 30
- 4.2.12 Timer 1 LSB (TL1) 30
- 4.2.13 Timer 0 MSB (TH0) 30
- 4.2.14 Timer 1 MSB (TH1) 30
- Rev: 062210 31 of 176 31
- 4.2.16 Port 1 (P1) 32
- RG bit 33
- Rev: 062210 34 of 176 34
- 4.2.21 Port 2 (P2) 36
- 7 6 5 4 3 2 1 0 37
- 4.2.25 Port 3 (P3) 38
- Rev: 062210 41 of 176 41
- RMS2, RMS1 42
- DME1, DME0 44
- LB3, LB2, LB1 44
- Rev: 062210 45 of 176 45
- CP/RL2 EXEN2 DCEN RESULT 46
- 4.2.36 Timer 2 Mode (T2MOD) 47
- 4.2.39 Timer 2 LSB (TL2) 48
- 4.2.40 Timer 2 MSB (TH2) 48
- Rev: 062210 49 of 176 49
- Rev: 062210 51 of 176 51
- 4.2.45 B Register (B) 52
- Rev: 062210 53 of 176 53
- Rev: 062210 54 of 176 54
- Rev: 062210 55 of 176 55
- Rev: 062210 56 of 176 56
- Rev: 062210 57 of 176 57
- 4.3 Instruction Timing 58
- 4.4 Addressing Modes 59
- 4.4.2 Direct Addressing 60
- 4.4.4 Immediate Addressing 61
- 4.4.6 Relative Addressing 61
- 4.4.7 Page Addressing 61
- 4.5 Program Status Flags 62
- Rev: 062210 63 of 176 63
- 5.6 Instruction Timing 64
- Rev: 062210 65 of 176 65
- Memory Access 66
- Rev: 062210 67 of 176 67
- 22h 68
- Rev: 062210 69 of 176 69
- Rev: 062210 70 of 176 70
- 5.7 Comparison to the 8051 71
- Rev: 062210 72 of 176 72
- Rev: 062210 73 of 176 73
- Rev: 062210 74 of 176 74
- Rev: 062210 75 of 176 75
- 6. MEMORY ACCESS 76
- 6.1 Internal Program Memory 76
- 6.2 Internal Data Memory 76
- 6.2.1 ROMSIZE Feature 77
- RMS2 RMS1 RMS0 78
- MAX ON-CHIP ROM 78
- Rev: 062210 79 of 176 79
- Rev: 062210 80 of 176 80
- 6.5 Data Memory Access 81
- Rev: 062210 82 of 176 82
- Rev: 062210 83 of 176 83
- 6.6 Data Memory Timing 84
- CKCON.2–0 85
- Rev: 062210 86 of 176 86
- C1 C2 C3 C4 87
- 7. POWER MANAGEMENT 88
- Precision Voltage Monitor 88
- 7.1.2 Power-Fail Reset 89
- 7.1.3 Power-On Reset 89
- 7.1.4 Bandgap Select 89
- Rev: 062210 90 of 176 90
- 7.1.5 Watchdog Wake-Up 91
- Rev: 062210 92 of 176 92
- 7.2 Power Conservation 93
- Rev: 062210 94 of 176 94
- 7.3 Power Management Modes 95
- Rev: 062210 96 of 176 96
- Rev: 062210 97 of 176 97
- 7.3.3 Switchback 98
- Rev: 062210 99 of 176 99
- Rev: 062210 100 of 176 100
- RG bit. The procedure to 101
- 8. RESET CONDITIONS 102
- 8.1 Reset Sources 102
- 8.2 Reset State 103
- 8.3 No-Battery Reset 103
- 8.4 In-System Disable Mode 104
- 9.1 Interrupt Overview 105
- 9. INTERRUPTS 105
- 9.2 Interrupt Sources 106
- 9.2.2 Timer Interrupts 107
- 9.2.4 Real-Time Clock 107
- 9.2.5 Power-Fail Interrupt 107
- 9.3 Simulated Interrupts 108
- 9.4 Interrupt Priorities 108
- 9.6 Interrupt Latency 109
- Rev: 062210 110 of 176 110
- Rev: 062210 111 of 176 111
- 10. PARALLEL I/O 112
- 10.1 Port 0 112
- 10.2 Port 2 113
- 10.3 Ports 1 and 3 114
- 10.4 Output Functions 115
- 10.6 Input Functions 115
- 10.9 I/O Port Timing 116
- 10.10 Optional Functions 117
- 11. PROGRAMMABLE TIMERS 118
- 11.1 16-Bit Timers 118
- INT1 and TR1 = 119
- 11.2 Mode 0 120
- 11.3 Mode 1 121
- 11.4 Mode 2 122
- 11.5 Mode 3 123
- 11.6 Timer 2 124
- Rev: 062210 125 of 176 125
- 11.7 Timer 2 Modes 126
- T2 = 1. As 127
- TIMER 2 128
- INTERRUPT 128
- T2CON.7 128
- 11.7.5 Baud-Rate Generator 129
- RL2 = 0 130
- 11.8 Time Base Selection 131
- 11.9 Watchdog Timer 132
- Rev: 062210 133 of 176 133
- Rev: 062210 134 of 176 134
- Rev: 062210 135 of 176 135
- 12. SERIAL I/O 136
- 12.1 Serial Mode Summary 136
- 12.1.3 Mode 2 137
- 12.1.4 Mode 3 137
- Rev: 062210 138 of 176 138
- Rev: 062210 139 of 176 139
- 12.3 Baud Rates 140
- 12.3.2 Mode 2 141
- 12.3.3 Mode 1 or 3 141
- 12.4 Serial I/O Description 143
- 12.4.2 Mode 1 145
- Rev: 062210 146 of 176 146
- RECEIVE TIMING 146
- TRANSMIT TIMING 146
- 12.4.3 Mode 2 147
- REGISTER 148
- 12.4.4 Mode 3 149
- Rev: 062210 150 of 176 150
- SADDR 11110000 151
- Rev: 062210 152 of 176 152
- 13. TIMED-ACCESS PROTECTION 153
- 13.1 Protected Bits 153
- 13.2 Protection Scheme 153
- TABLE_READ: 155
- 14. REAL-TIME CLOCK 156
- 14.3 Using the RTC Alarm 158
- TRMx bits must be 160
- 15. BATTERY BACKUP 161
- 15.1 Selecting a Battery 161
- REGISTER NAME LOCATION 162
- 16. INSTRUCTION SET DETAILS 163
- Rev: 062210 164 of 176 164
- Rev: 062210 165 of 176 165
- MNEMONIC 165
- Rev: 062210 166 of 176 166
- Rev: 062210 168 of 176 168
- Rev: 062210 169 of 176 169
- Rev: 062210 170 of 176 170
- 171 of 176 171
- 17. TROUBLESHOOTING 172
- 18.1 Technical Support 174
- 18.2 Development Tools 174
- 18.3 Software Compatibility 174
- Rev: 062210 175 of 176 175
- 2010 Maxim Integrated 176
Verwandte Produkte und Handbücher für Hardware Maxim-integrated High-Speed Microcontroller
Hardware Maxim-integrated High-Speed Microcontroller Users Guide: DS80C390 S Bedienungsanleitung
(158 Seiten)
(158 Seiten)
Hardware Maxim-integrated High-Speed Microcontroller Users Guide: Network Mi Bedienungsanleitung
(221 Seiten)
(221 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.020 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern