Maxim-integrated DS80C390 Bedienungsanleitung PDF herunterladen (Seite 13)

DS80C390

13 of 58 110199

INTERNAL MOVX SRAM

The DS80C390 contains 4kB of SRAM that can be configured as user accessible MOVX memory,

program memory, or optional stack memory. The specific configuration and locations are governed by the

Internal Data Memory Configuration bits (IDM1, IDM0) in the Memory Control Register (MCON;C6h).

Note that when the SA bit (ACON.2) is set, the first 1kB of the MOVX data memory is reserved for use

by the 10-bit expanded stack. Internal memory accesses will not generate WR, RD, or PSEN strobes.

The DS80C390 can configure its 4kB of internal SRAM as combined program and data memory. This

allows the application software to execute self-modifiable code. The technique loads the 4kB SRAM

with bootstrap loader software, and then modifies the IDM1 and IDM0 bits to map the 4kB starting at

memory location 40000h. This allows the system to run the bootstrap loader without disturbing the 4 MB

external memory bus, making the device in-system reprogrammable for Flash or NV RAM.

INTERNAL MOVX SRAM CONFIGURATION Table 4

IDM1 IDM0 CMA MOVX Data Memory CAN Message

Memory

Shared Program /Data

Memory

0 0 0 00F000h-00FFFFh 00EE00h-00EFFFh - -

0 0 1 00F000h-00FFFFh 401000h-4011FFh - -

0 1 0 000000h-000FFFh 00EE00h-00EFFFh - -

0 1 1 000000h-000FFFh 401000h-4011FFh - -

1 0 0 400000h-400FFFh 00EE00h-00EFFFh - -

1 0 1 400000h-400FFFh 401000h-4011FFh - -

1 1 0 - - 00EE00h-00EFFFh 400000h-400FFFh*

1 1 1 - - 401000h-4011FFh 400000h-400FFFh*

*10-bit expanded stack not available in Shared Program /Data Memory mode.

EXTERNAL MEMORY ADDRESSING

The enabling and mapping of the chip enable signals is done via the Port 4 Control Register (P4CNT;92h)

and Memory Control Register (MCON; 96h); The Extended Address and Chip Enable Generation Table

shows which chip enable and address line signals are active on Port 4. Following reset, the device will be

configured with P4.7-P4.4 as address lines and P4.3-P4.0 configured as 0-CE3 , with the first program

fetch being performed from 00000h with CE0 active. The following tables illustrate which memory

ranges are controlled by each chip enable as a function of which address lines are enabled.

EXTERNAL MEMORY ADDRESSING PIN ASSIGNMENTS Table 5

Address/Data Bus

CE3 -CE0 PCE3 - PCE0

Addr 19-16 Addr 15-8 Addr 7-0 Data Bus

Multiplexed P4.3-P4.0 P5.7-P5.4 P4.7-P4.4 P2 P0 P0

Demultiplexed P4.3-P4.0 P5.7-P5.4 P4.7-P4.4 P2 P1 P0

EXTENDED ADDRESS AND CHIP ENABLE GENERATION Table 6

Port 4 Pin Function Port 4 Pin Function

P4CNT.5-3 P4.7 P4.6 P4.5 P4.4 P4CNT.2-0 P4.3 P4.2 P4.1 P4.0

000 I/O I/O I/O I/O 000 I/O I/O I/O I/O

100 I/O I/O I/O A16 100 I/O I/O I/O

CE0

101 I/O I/O A17 A16 101 I/O I/O

CE1 CE0

110 I/O A18 A17 A16 110 I/O

CE2 CE1 CE0

111(default) A19 A18 A17 A16 111(default)

CE3 CE2 CE1 CE0

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxim-integrated DS80C390 Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Maxim-integrated DS80C390